Zobrazujeme nabídky

Buried

Upřesnit výběr

Nalezeno více než 1 000 nabídek. (Zobrazuji 871 – 900)

1.1 This guide covers procedures to be implemented prior to the application of cathodic protection for evaluating the suitability of a tank for upgrading by cathodic protection alone. 1.2 Three procedures are described and identified as Methods A, B, and C. 1.2.1...

1 521
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

ISO 6993-3:2006ISO 6993-3:2006 gives the requirements for full-end load-resistant fittings and saddles made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range...

3 861
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

ISO 21809-4:2026This document specifies the requirements for qualification, application, inspection, testing, handling and storage of materials for plant application of two-layer polyethylene coatings (2-layer PE) applied externally for the corrosion protection of bare...

5 834
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

ISO 6993-4:2006ISO 6993-4:2006 specifies a code of practice for the design, handling and installation of high-impact poly(vinyl chloride) (PVC-HI) pipes and fittings intended to be used for the supply of gaseous fuels through buried pipelines having an operating...

2 860
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

ISO 21809-2:2026This document specifies the requirements for qualification, application, inspection, testing handling and storage of materials for plant application of single-layer fusion-bonded epoxy (FBE) coatings applied externally for the corrosion protection of...

5 834
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

ISO 21809-1:2018This document specifies requirements for plant-applied external three-layer polyethylene and polypropylene based coatings for corrosion protection of welded and seamless steel pipes for pipeline transportation systems in the petroleum and natural gas...

5 834
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

Tracklist DVD-1 A Documentary Film Of The Chicago Blues Featuring Interviews And Music By Those Who Were There Bonus Live CD CD-1 Born In Chicago CD-2 Buried Alive In The Blues CD-3 Walk Away CD-4 Drinkin Wine CD-5 GM Boogie CD-6 Left Handed Soul CD-7 Im Gonna Miss You...

399
Cena produktu bez dopravy
Skladem
PatShop.cz
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 17176-1:2019This part of prEN 17176 specifies the general aspects of oriented unplasticized poly(vinyl chloride) (PVC-O), for solid wall piping systems intended for water supply, pressurized sewer systems and irrigation systems to be used underground or...

1 890
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN ISO 21809-5:2018This part of ISO 21809 specifies the requirements for qualification, application, testing and handling of materials required for the application of reinforced concrete coating externally to either bare pipe or pre-coated pipe for use in pipeline...

2 616
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE CEN/TS 17176-3:2022 EXThis document specifies the characteristics of solid-wall oriented unplasticized poly(vinyl chloride) (PVC-O) fittings for piping systems intended for water supply and for buried drainage, sewerage, treated waste water and irrigation under...

2 238
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN ISO 21809-5:2018This part of ISO 21809 specifies the requirements for qualification, application, testing and handling of materials required for the application of reinforced concrete coating externally to either bare pipe or pre-coated pipe for use in pipeline...

2 616
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 50520:2021This European Standard establishes the requirements and tests for cover plates and cover tapes used for the mechanical protection, identification and warning of the location of buried cables or buried conduits. NOTE This European Standard does not...

2 035
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 17415-3:2021This document specifies requirements, design and test methods for factory made thermally insulated bonded valve assemblies for directly buried district cooling distribution systems, comprising a steel valve from DN 15 to DN 1200, rigid polyurethane...

2 267
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE CEN/TS 17176-3:2022 EXThis document specifies the characteristics of solid-wall oriented unplasticized poly(vinyl chloride) (PVC-O) fittings for piping systems intended for water supply and for buried drainage, sewerage, treated waste water and irrigation under...

2 238
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 50626-2:2024This document specifies requirements and tests for PE, PP and PVC-U leak-tight solid wall conduit systems with circular cross section, manufactured individually or as part of an assembly having a specified performance time and buried underground to a...

2 558
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 17176-5:2019This part of prEN 17176 specifies the characteristics for the fitness for purpose of oriented unplasticized poly(vinyl chloride) (PVC-O) piping systems intended for water supply, pressurized sewer systems and irrigation systems to be used underground...

1 860
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 14419:2019This document specifies requirements and test methods for surveillance systems for directly buried hot water networks in accordance with prEN 13941-1. This document specifies requirements for the manufacture of measuring elements, for the manufacture...

2 093
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 50626-1:2024This document specifies requirements and tests for conduit systems with circular cross section buried underground for the protection and management of insulated conductors and/or power cables or communication cables installed individually or...

2 355
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 12954:2020This document describes the general principles for the implementation and management of a system of cathodic protection against corrosive attacks on structures which are buried or in contact with soils, surface fresh waters or underground waters, with...

2 762
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 17415-1:2020This document specifies requirements, design and test methods for straight lengths of factory made thermally insulated pipe-in-pipe assemblies for directly buried district cooling distribution systems, comprising a service pipe from DN 15 to DN 1200,...

2 645
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 12954:2020This document describes the general principles for the implementation and management of a system of cathodic protection against corrosive attacks on structures which are buried or in contact with soils, surface fresh waters or underground waters, with...

2 762
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.

UNE EN 16903:2026This document provides product category rules (PCR) for Type III environmental product declarations, as described in EN ISO 14025 and EN 15942, for plastic piping systems buried outside building structure and their main structural components, as...

2 704
Cena produktu bez dopravy
Skladem
Technické normy
Obchod nemá dostatečný počet hodnocení
Tento e-shop nezískal dostatečný počet hodnocení za posledních 90 dní.