HP 8SU06A

Easy to install, reposition, and remove Enjoy the ease of working with this repositionable adhesive-back fabric that is easy to install, reposition, and remove with virtually no residue. The special adhesive is designed to stick to non-porous surfaces to create seamless, photographic image quality wall and floor graphics. Tested and approved for indoor smooth floor graphics4. Reduce the environmental impact of printing Offer an adhesive fabric that complies with high health standards. Help meet environmental and safety objectives with this REACH compliant,1 flame-resistant2 adhesive fabric. Grab attention with vibrant image quality for a variety of applications Capture realistic graphic detail for applications from wall murals and event signage to retail displays. Achieve a high-quality look with this versatile, easy-to-handle, repositionable self-adhesive fabric—ideal for a wide range of indoor and outdoor applications. Ink compatibility Compatible with HP Bright Office Inks, HP Vivid Photo Inks, PageWide XL and HP Latex Inks Core size 3-in core with a removable 2-in adapter Weight (With liner) 289 g/m? per ISO 536 Test Method Thickness (With liner) 304 microns/12 mil per ISO 20534 Test Method Liner 120 g/m?, double-sided PE-coated silicone paper Adhesive Clear, removable, and repositionable adhesive Removability Up to 3 years removable/repositionable indoors Opacity Greater than 85% per TAPPI T-425 Test Method and ISO 2471 Test Method Brightness Greater than 87% per Tappi-T452 Test Method Whiteness 118 per ASTM E313-98 Test Method Finish Matte Slip rating Certified according to ANSI A137.1/A326.3 and AS HB198:2014 (AS/NZS 4586)4 Operating temperature 15 to 25° C / 59 to 77° F Operating humidity 20-80% RH Water resistance Moderately water-resistant3 Wind orientation Print side out Dry time Immediate Flame resistance Class A, ASTM E842 Lamination For additional protection, liquid or spray coatings are recommended PageWide cutter The weight of this material is higher than the recommended weight limit for the HP PageWide XL cutter, which may reduce the expected life of the cutter Shelf life 1 year, unopened in original packaging Storage temperature 10 to 27° C / 50 to 80° F Storage humidity 35 to 65% RH Environmental REACH compliant1 Finishing/post-processing Use a carbide knife for kiss and die-cutting Installation tip To install the graphic, peel 101 millimeters (4 inches) of the release liner off the graphic and place on wall or surface. Continue to peel back 101 millimeters (4 inches) of the liner incrementally while mounting. Country of origin Product of China and Malaysia